common problems and solutions -杏耀注册

reason: too much tintreatment: reduce the amount of tincause: h / b head groove is too shallow or wornremedy: check the h / b head groovereason: core offsettreatment: adjust the solder joint with h / b head or core and solder joint positionreason: h ...

reason: platform sensor line sensor position are not allowedtreatment method: move the sensor line to the appropriate location (can open the system state to observe the sensor status)cause: the sensing line is badremedy: replace the sensor line...

cause: the origin switch does not sense the origin switchmethod: first check the origin switch is damaged (can be observed in the system status bar) if the switch is not bad to check whether the motor line is unreasonable。...

treatment method: adjust the length of the core screw / click "step forward / step forward" to adjust the length of the core (for double-headed step cutting machine series.

treatment: cutter wear, please replace the tool.

remedy: cut the cutter down / replace the blade.

(for double-headed cutting machine series sx-sc-01, other not applicable)