common problems and solutions -杏耀注册

treatment: check the tin speed, point tin height, point tin pressure, point tin needle is correct. on the contrary, too much tin is the same.

treatment: check the needle is blocked, the pressure is open, and the digital barometric pressure controller timing quantitative control mode timed is open.

approach:1. adjust the opening delay value;2. straight line starting point needle to the left direction to adjust;3. check whether the barometric pressure is too small....

approach:

1. adjustable closing distance;

2. check whether the barometric pressure is too large.

approach:

1. digital air pressure spit controller pressure is too small;

2. point tin needle is blocked.

approach:1) check the lens is dirty;2) whether the laser focal length in the range3) whether the laser film film is damaged;4) whether the laser light is dislocation;5) whether the laser fixture light block;6) laser power is too small or laser speed ...